Machine Safeguarding Map Machine Safeguarding Map Equipment Name: Equipment #: Department: Created by: Approved by: Date NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine Individual item on machine Symbol Lookup 1 C-1: Chain: Verify it is latched in place. Chain is not broken or missing links. T-1: Two Hand Control: No cracks or missing pieces. Test that both hands are required to operate machine. F-1: Foot Control: Cover is secured over the pedal. E-1: Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine. H-1: Hard Guard: Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges. I-1: Interlocked Guard: When machine is not in operation, test that machine will not start when interlock guard is open. A-1: Adjustable Guard: Adjust the guard to the height/length of the material to be cut or to cover the extra open section(s) of the machine. P-1: Perimeter Guard: In good condition and secured to floor. No missing bolts. No sharp edges. L-1: Light Curtain: When machine is not in operation, test that machine will not start when the light curtain is blocked. EP-1: Emergency Pull Cord: Red color. Must be working – Push/pull when machine is not in operation and then try to start machine. SM-1: Safety Mat: When machine is not in operation, step on mat and test that machine will not start until it is reset. S-1: Shield: No cracks or missing pieces and is secured to the machine. Must be put into place prior to using the machine. IDB-1: Interlocked Die Blocks: Test interlock plugs: turn off motor, making sure flywheel is stopped. Disconnect interlock plug, verify motor will not start. GFS-ST: Soft Touch Guards factory installed by equipment manufacturer. Use test tool to verify guards are functioning SG: Safety Gauge: Use to gauge Tongue Guard at 1/4" or less and the Work Rest at 1/8" or less GFS-1: Factory Installed By Equipment Manufacturer: Automatic Interlocked Closing Doors PC: Plastic Curtain: Plastic Curtain covering open area, make sure all flaps of curtain are there and in good condition 1st Machine Safeguarding Description and Anchor Method Symbol Lookup 2 C-1: Chain: Verify it is latched in place. Chain is not broken or missing links. T-1: Two Hand Control: No cracks or missing pieces. Test that both hands are required to operate machine. F-1: Foot Control: Cover is secured over the pedal. E-1: Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine. H-1: Hard Guard: Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges. I-1: Interlocked Guard: When machine is not in operation, test that machine will not start when interlock guard is open. A-1: Adjustable Guard: Adjust the guard to the height/length of the material to be cut or to cover the extra open section(s) of the machine. P-1: Perimeter Guard: In good condition and secured to floor. No missing bolts. No sharp edges. L-1: Light Curtain: When machine is not in operation, test that machine will not start when the light curtain is blocked. EP-1: Emergency Pull Cord: Red color. Must be working – Push/pull when machine is not in operation and then try to start machine. SM-1: Safety Mat: When machine is not in operation, step on mat and test that machine will not start until it is reset. S-1: Shield: No cracks or missing pieces and is secured to the machine. Must be put into place prior to using the machine. IDB-1: Interlocked Die Blocks: Test interlock plugs: turn off motor, making sure flywheel is stopped. Disconnect interlock plug, verify motor will not start. GFS-ST: Soft Touch Guards factory installed by equipment manufacturer. Use test tool to verify guards are functioning SG: Safety Gauge: Use to gauge Tongue Guard at 1/4" or less and the Work Rest at 1/8" or less GFS-1: Factory Installed By Equipment Manufacturer: Automatic Interlocked Closing Doors PC: Plastic Curtain: Plastic Curtain covering open area, make sure all flaps of curtain are there and in good condition 2nd Machine Safeguarding Description and Anchor Method Symbol Lookup 3 C-1: Chain: Verify it is latched in place. Chain is not broken or missing links. T-1: Two Hand Control: No cracks or missing pieces. Test that both hands are required to operate machine. F-1: Foot Control: Cover is secured over the pedal. E-1: Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine. H-1: Hard Guard: Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges. I-1: Interlocked Guard: When machine is not in operation, test that machine will not start when interlock guard is open. A-1: Adjustable Guard: Adjust the guard to the height/length of the material to be cut or to cover the extra open section(s) of the machine. P-1: Perimeter Guard: In good condition and secured to floor. No missing bolts. No sharp edges. L-1: Light Curtain: When machine is not in operation, test that machine will not start when the light curtain is blocked. EP-1: Emergency Pull Cord: Red color. Must be working – Push/pull when machine is not in operation and then try to start machine. SM-1: Safety Mat: When machine is not in operation, step on mat and test that machine will not start until it is reset. S-1: Shield: No cracks or missing pieces and is secured to the machine. Must be put into place prior to using the machine. IDB-1: Interlocked Die Blocks: Test interlock plugs: turn off motor, making sure flywheel is stopped. Disconnect interlock plug, verify motor will not start. GFS-ST: Soft Touch Guards factory installed by equipment manufacturer. Use test tool to verify guards are functioning SG: Safety Gauge: Use to gauge Tongue Guard at 1/4" or less and the Work Rest at 1/8" or less GFS-1: Factory Installed By Equipment Manufacturer: Automatic Interlocked Closing Doors PC: Plastic Curtain: Plastic Curtain covering open area, make sure all flaps of curtain are there and in good condition 3rd Machine Safeguarding Description and Anchor Method Symbol Lookup 4 C-1: Chain: Verify it is latched in place. Chain is not broken or missing links. T-1: Two Hand Control: No cracks or missing pieces. Test that both hands are required to operate machine. F-1: Foot Control: Cover is secured over the pedal. E-1: Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine. H-1: Hard Guard: Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges. I-1: Interlocked Guard: When machine is not in operation, test that machine will not start when interlock guard is open. A-1: Adjustable Guard: Adjust the guard to the height/length of the material to be cut or to cover the extra open section(s) of the machine. P-1: Perimeter Guard: In good condition and secured to floor. No missing bolts. No sharp edges. L-1: Light Curtain: When machine is not in operation, test that machine will not start when the light curtain is blocked. EP-1: Emergency Pull Cord: Red color. Must be working – Push/pull when machine is not in operation and then try to start machine. SM-1: Safety Mat: When machine is not in operation, step on mat and test that machine will not start until it is reset. S-1: Shield: No cracks or missing pieces and is secured to the machine. Must be put into place prior to using the machine. IDB-1: Interlocked Die Blocks: Test interlock plugs: turn off motor, making sure flywheel is stopped. Disconnect interlock plug, verify motor will not start. GFS-ST: Soft Touch Guards factory installed by equipment manufacturer. Use test tool to verify guards are functioning SG: Safety Gauge: Use to gauge Tongue Guard at 1/4" or less and the Work Rest at 1/8" or less GFS-1: Factory Installed By Equipment Manufacturer: Automatic Interlocked Closing Doors PC: Plastic Curtain: Plastic Curtain covering open area, make sure all flaps of curtain are there and in good condition 4th Machine Safeguarding Description and Anchor Method File Upload Drop a file here or click to upload Choose File Maximum file size: 516MB plus1 Add minus1 Remove Submit If you are human, leave this field blank.
