Machine Safeguarding Map
Equipment Name: Chain Saw
Equipment #: 123
Department: Forestry
Created By: Mike Mitchell
Approved by: Tom Smith
Date: 02/06/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[C-1] [T-1] [E-1] [PC]
Chain: Verify it is latched in place. Chain is not broken or missing links.
Two Hand Control: No cracks or missing pieces. Test that both hands are required to operate machine.
Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine.
Plastic Curtain: Plastic Curtain covering open area, make sure all flaps of curtain are there and in good condition.
[EP-1]
Emergency Pull Cord: Red color. Must be working – Push/pull when machine is not in operation and then try to start machine.
Machine Safeguarding Map
Equipment Name: Table Saw
Equipment #: TS-123
Department: Woodworking
Created By: Mike Mitchell
Approved by: Tom Smith
Date: 02/06/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[PC] [EP-1]
Plastic Curtain: Plastic Curtain covering open area, make sure all flaps of curtain are there and in good condition.
Emergency Pull Cord: Red color. Must be working – Push/pull when machine is not in operation and then try to start machine.
Machine Safeguarding Map
Equipment Name: Scissors
Equipment #: 10
Department: Sales
Created By: Scott Shaver
Approved by:
Date:
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[C-1]
Chain: Verify it is latched in place. Chain is not broken or missing links.
Machine Safeguarding Map
Equipment Name: Scissors
Equipment #: 10
Department: Sales
Created By: Scott Shaver
Approved by:
Date: 02/18/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[H-1]
Hard Guard: Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
Machine Safeguarding Map
Equipment Name: Scissors
Equipment #: 1023
Department: Sales
Created By: Scott Shaver
Approved by:
Date: 02/18/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[H-1] [E-1]
Hard Guard: Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine.
[E-1]
Emergency Stop Button: Red color, no cracks or missing pieces. Must be working – Push when machine is not in operation and then try to start machine.
Machine Safeguarding Map
Equipment Name: Calculator
Equipment #: Qwer
Department: Sales
Created By: Scott Shaver
Approved by:
Date: 02/24/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
Machine Safeguarding Map
Equipment Name: Phone
Equipment #: Qwe
Department: Sales
Created By: Scott
Approved by:
Date:
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[C-1] [SM-1]
Chain: Verify it is latched in place. Chain is not broken or missing links.
Safety Mat: When machine is not in operation, step on mat and test that machine will not start until it is reset.
Machine Safeguarding Map
Equipment Name: Upcut Saw
Equipment #: 1
Department: Roughend
Created By: Nick Steiner
Approved by: Luc Connor
Date: 03/07/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[H-1] [H-1] [F-1]
Hard Guard: Yellow Pulley Guard – Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
Hard Guard: Orange Blade Guard – Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
Foot Control: Pedal is secured beneath the cover guard.
[H-1]
Hard Guard: Yellow Pulley Guard – Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
[H-1]
Hard Guard: Orange Blade Guard – Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
[F-1]
Foot Control: Pedal is secured beneath the cover guard.
Machine Safeguarding Map
Equipment Name: Upcut Saw – V2
Equipment #: 1
Department: Roughend
Created By: Nick Steiner
Approved by: Luc Connor
Date: 03/07/2025
NOTE: Ensure all safeguards are in-place, secured and functional before operating this machine
Individual Guarding Descriptions & Requirements
[H-1]
Hard Guard: Yellow Pulley Guard – Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
[H-1]
Hard Guard: Orange Blade Guard – Attached to machine. All fasteners in place. Guard is secure and does not have sharp edges.
[F-1]
Foot Control: Pedal is secured beneath the cover.